FP6400 - over 6000 watts of power from a 2U amp that even a skinny bugger like Dunc can lift over his head on one hand!!!

We are proud to announce a very exclusive dealership indeed, Lab Gruppen amplification is now available from Phoenix Soundworks. We are main dealers for a great chunk of Central and Eastern England for these formidable power providers.

Lab Gruppen amplifiers are high end touring spec amps made in Sweden. They are used to drive L'Acoustic systems...say no more. To find out more you can get detailed spec charts from the Lab Gruppen website and the UK distributor, Sennheiser.

Here for now is a brief glimpse of just a couple of the amps.....

 

Lab Gruppen amps come in two series:
IP (iron power) and FP (ferrite power). The IP series uses a conventional power supply to deliver its grunt while the FP's use the very lightweight switch mode power supply.

The unit shown on the left is the top of the range FP-6400. It can deliver up to a massive 6000 watts plus into 2 ohms from a 2U unit weighing only 10 kilos. For further details call Duncan on 01604 466499 or visit the Lab Gruppen website.

 

---

IP series

The Lab Gruppen IP series offers an affordable solution to providing a consistent and reliable power source to your system.

To give you a clue, the iP 2100 is rated at 2 x 1050 W into 2 ohms (or 2 x 700 W into 4 ohms) in the new compact chassis and the weight is only 18 kg.

The iP 1150Q is a quad channel amp with a capacity of 1150 watts shown in the table on the right.

 

iP 450

 

iP 1350

Model	8 ohm	4 ohm	2 ohm
iP 450	100w	150w	200w
iP 900	190w	300w	450w
iP 1150Q (4 ch)	130w	200w	285w
iP1350	300w	500w	700w
iP2100	425w	700w	1050w

ALL FIGURES SHOWN ARE PER CHANNEL

The following table shows the various power ratings per channel for the Lab Gruppen FP series

Model	8 ohm	4 ohm	2 ohm
fP 2200	350w	650w	1100w
fP 2400 Q (4 ch)	370w	380w	640w
fP 2600	430w	840w	1200w
fP 3400	1100w	1500w	1700w
fP 6400	1300w	2300w	2900w

the weights of this eries range from 7.9kg to 10kg